Operation Manual

E. OTHERS INFORMATIONS
39
• If the shock motor ceases to function (i.e. battery dies,
wire cut ...), it will remain in the mode it was in when it
stopped.
• To adjust the shock mode, use a 2 mm hex wrench on
the failsafe adjuster bolt to manually set the shock to
either the open or lock mode.
• If the failsafe adjuster bolt cannot be accessed, unbolt
the shaft eyelet according to your bicycle manufacturer’s
instructions.
• Manually adjust the shock to either the open or lock
mode using the failsafe adjuster bolt, then reinstall the
shaft eyelet according to your bicycle manufacturer’s
instructions.
2. Failsafe Adjuster