Installation guide

5
7
START
7
8 9*
10
11
12
13
6
THE CONTROLLER
A key feature of the E-GO is without doubt
its sleek, pocket-sized, wireless controller
which allows you to intuitively control its
movements by simply sliding the throttle /
brake (7) up and down.
The battery status indicator's light (9)
indicates the wireless controller's and board’s
battery status:
Green light indicates the board’s battery
status. Blue light indicates the controller’s
battery status. Each light blinks 1,2,3 or 4
times in series. Each blink indicates 25% of the
total battery capacity.
When the board or controllers battery goes
under 25% of its maximum capacity, the
controller vibrates, its light will turn red and
blink 1 time. When charging - with the control-
ler connected to the board - a red light
indicates that the controller’s battery charge
is less 100%.
Example: (when activated but not charging)
the board's battery is completely empty and
the controller's battery has less than 75% of
its full charge capacity left 1 red blink will be
followed by 2 blue blinks.
(For more information on the yellow and purple warning
lights, reference troubleshoot page 19)