Installation guide

INSTALLATION GUIDE
22
BATTERY PACK AND ECU
29
32
28
31
30
29
28
ECU (Electronic
Control Unit)
battery pack
battery pack rubber
28.
29.
30.
JST RCY connector
EC3 connector
31.
32.
FRONT TRUCK SET
EGOCR011
1 Unscrew the front wheel bolts.
2 Dismount the front wheels from the
truck's axle.
3 Unscrew the top screws
connecting the front baseplate to the
deck.
4 Replace the complete assem-
bly with the replacement part and
reinstall.
5 Mount the wheels back on
the truck's axle and tighten the screws.
REAR TRUCK SET WITH
MOTOR
EGOCR012
1 Unscrew the rear wheel nuts.
2 Dismount the rear wheels from the
truck's axle.
3 Unscrew the top screws
connecting the rear baseplate to the
deck.
4 Replace the complete assembly
with the replacement part and reinstall.
5 Mount the wheels back on the truck's
axle and tighten the screws.
ELECTRONIC CONTROL
UNIT
EGOCR013
1 Unscrew the screws connecting the
ECU to the deck.
2 Slide the ECU from
the battery pack.
3 Disconnect the
wires connecting the ECU to the battery
pack.
4 Reconnect the battery packs
wires to the replacement part.
5 Slide
the replacement part in it's slot with
the battery pack.
6 Screw in the deck
screws connecting the ECU to the deck.