Installation guide

TROUBLESHOOTING

Check if the board is activated on. When turning on the board you should

hear two beeps and its status indicator light should come on.

Check if the controller is powered ON. When turning ON the controller, its

blue light should start flashing.

If both the board and controller are powered ON, and the wireless controller's

green light is not flashing, it means the board and controller are not syn-

chronized (see page 10).

If both board and controller are powered ON, and both the controller's blue

and green light are flashing but you don`t hear a beep and the board does

not start, turn off the board and turn it on again.

If the board and controller are synchronized and the controller's blue light

is followed by a red flashing light and vibration, it means the board's battery

is low and needs to be recharged.

If board and controller are synchronized and the controller's green light is

followed by a a red flashing light and vibration, it means the controller's

battery is low and needs to be recharged.

1.2

1.1

1.3

1.4

1.5

1.6

MY BOARD DOESN`T

START

Check if the board is in slow speed mode. If so, move the controller's

speed mode switch to fast speed mode.

If during your ride the controller's blue light is flashing, followed by a red

flashing light and accompanied by vibration, it means the board's battery

is low and needs to be recharged.

2.1

2.2

MY BOARD IS MOVING

AT LOW SPEED...