User Manual

4 E-flite Taylorcraft ARF Assembly Manual
Important Information About Motor
Selection
We recommend the E-flite
®
Park 450 Brushless Outrunner,
890Kv (EFLM1400) to provide you with excellent sport and
aerobatic power and a worry-free outrunner motor. The
Taylorcraft does not include a propeller, but we recommend our
10X8 Electric Prop (EFLP1080E).
Sport Outrunner Setup
EFLM1400 Park 450 Brushless Outrunner Motor, 890Kv
EFLA1025 25-Amp Pro Brushless ESC
EFLB21003S 11.1V 2100mAh 3-Cell Li-Po, 16GA
THP21003SPL 2100mAh 3-Cell 11.1V Li-Po, 16GA
EFLP1080E 10 x 8 Electric Prop
EFLC3005 Celectra
™
1- to 3-cell Li-Po Charger
Or
THP21003SPL 2100 mAh 3-Cell 11.1V Li-Po, 16GA
High Power Setup
EFLM1505 Park 480 Brushless Outrunner Motor, 1020Kv
EFLA312B 40-Amp Brushless ESC
APC12060E 12x6 Electric prop
EFLB21003S 11.1V 2100mAh 3-Cell Li-Po, 16 GA
Or
THP21003SPL 2100 mAh 3-Cell 11.1V Li-Po, 16GA
Optional Accessories
EFLA110 Power Meter
Required Tools and Adhesives
Tools & Equipment
EFLA250 Park Flyer Tool Assortment, 5-piece
Or Purchase Separately
EFLA257 Screwdriver, #0 Phillips (or included with EFLA250)
EFLA251 Hex Wrench: 3/32-inch (or included with EFLA250)
#1 Phillips screwdriver #2 Phillips screwdriver
Card stock Epoxy brush
Felt-tipped pen Hex wrench: 3/32-inch
Hobby knife (#11 blade) Hobby scissors
Low-tack masking tape Mixing sticks
Paper towels Pencil
Pin drill Pliers
Rubbing alcohol Ruler
Side cutters Square
String Medium grit sandpaper
Drill bits: 1/16-inch (1.5mm), 3/32-inch (2mm)
Adhesives
6-minute epoxy (HAN8000) 30-minute epoxy (HAN8002)
Canopy glue Thin CA
Medium CA Threadlock