User Manual

6
EN
Wing Installation
1. Lift the front of the canopy (A) and pull it
forward off the fuselage.
2. Align the 4 holes in the wing (B) with the 4
screw posts in the fuselage.
3. Secure the wing to the fuselage by fully
tightening the 4 included screws (C).
4. Connect the aileron leads to the aileron
ports (D) on the receiver. There is no difference
between the two connections on the receiver.
Left and right servo connectors do not have to
be connected to a particular port.
5. Be sure to check proper control directions
before your first flight.
6. Reinstall the canopy on the fuselage.
Disassemble in reverse order.
A
C
B
D
Top View