User Manual

18 E-flite DHC-2 Beaver ARF Assembly Manual
 6. Use a #1 Phillips screwdriver to install the screws
provided with the servos to attach the servo to the
servo mounting blocks.
 7. Remove any of the unnecessary arms from the
servo horn using side cutters. Enlarge the outer hole
of the servo arm with a pin drill and 5/64-inch
(2mm) drill bit.
 8. Secure a 9-inch (228mm) servo extension to the
aileron servo. Use string or a commercially available
connector to keep them from unplugging inside the
wing accidentally.