User Manual

24 E-flite Extra 260 480 ARF Assembly Manual
Rudder and Fin
Required Parts
Fuselage Rudder
Fin CA hinge (3)
Tail wheel assembly
Required Tools and Adhesives
Hobby knife Thin CA
Felt-tipped pen Square
6-minute epoxy Medium grit sandpaper
 1. Roughen the tail wheel assembly using medium grit
sandpaper. Use 6-minute epoxy to glue the tail wheel
assembly into the rudder.
 2. Hinge the rudder and fin, using the same process
as described in Aileron Hinging. Use three hinges for
this process.
 3. Place the fin in position on the fuselage. Trace the
outline of the fuselage onto both sides of the fin.