User manual EFL-EFL2475

Available from: www.modelflight.com.au
Landing
Gear
Installation
Required Par ts
Fuselage
Main landing gear
Wheel pant (L&R)
1
3
/
4
-inch (45mm) wheel (2)
4-40 x 3/8-inch machine screws (2)
#4 black washers (6)
4-40 nut (2)
4-40 locknut (4)
4-40 x 1
1
/
4
-inch socket head screw (2)
2mm x 6mm wood screws (2)
Required T ools and Adhesives
Phillips screwdriver (small)
Needle-nose pliers
Nut driver:
1
/
4
-inch
Hex wrench:
3
/
32
-inch
Note : Y ou may consider using a larger diameter
wheel,
such as 2
1
/
4
-inch (58mm) (EFLA224), if your flying
site
has rough terrain. By using a larger wheel, you will
not
be able to use the included wheel pants.
1. Place the landing gear onto the bottom of the
fuselage.
They will angle forward when installed in the correct
direction. Attach with two 4-40 x
3
/
8
-inch machine
screws
and
two
#4
black
washers.
8
E-flite
Extra
260
480
ARF
Assembly
Manual