User manual EFL-EFL2475

Available from: www.modelflight.com.au
Rud
der
and
Ele
vator
Ser
v
os
Required Par ts
Fuselage
Micro control hor n w/backplate (2)
5-inch (127mm) pushrod wire
2mm x 4mm screw (2)
4
1
/
2
-inch (115mm) pushrod wire
Micro control connector w/retainer (2)
Ser vo (2)
18-inch (457mm) ser vo extension (2)
Required T ools and Adhesives
Phillips screwdriver (small) Hobby knife
6-minute epoxy
1. Secure an 18-inch (457mm) ser vo extension to
the
ser vo. Mount the elevator ser vo using the hardware
provided with the ser vo.
2. Use a hobby knife to enlarge the inboard hole
in one of the remaining control hor ns. Attach the
4
1
/
2
-inch(115mm) pushrod wire to the control horn.
3. Attach the micro control hor n to the elevator using
the
control
hor
n
backplate
and
6-minute
epoxy
.
Hint
:
It
is
easiest
to
pass
the
extension
through
the
for
mer
,
then to the rear of the fuselage and retrieve it at the
opening
for
the
ser
vo.
26
E-flite
Extra
260
480
ARF
Assembly
Manual