User manual EFL-EFL2475

Available from: www.modelflight.com.au
Required
Par
ts
Rud
der
and
Fin
2. Hinge the rudder and fin, using the same
process
as described in Aileron Hinging. Use three hinges
for
this
process.
Fuselage
Rudder
Fin CA hinge (3)
T ail wheel assembly
Required T ools and Adhesives
Hobby knife Thin CA
Felt-tipped pen Square
6-minute epoxy Medium grit sandpaper
1. Roughen the tail wheel assembly using medium
grit
sandpaper . Use 6-minute epoxy to glue the tail
wheel
assembly into the rudder .
3. Place the fin in position on the fuselage. T race
the
outline
of
the
fuselage
onto
both
sides
of
the
fin.
24
E-flite
Extra
260
480
ARF
Assembly
Manual