User manual EFL-EFL2475

Available from: www.modelflight.com.au
6.
Slide
the
elevator
into
position,
then
the
stabilizer
.
Note
:
Star
t
with
the
two
hinges
at
the
center
nearest
the
fuselage. Continue outward to the center hinges, then
the
hinges at the tips. Be careful not to damage the joiner
section
of
the
elevators.
8 . Check the alignment and make sure ever ything lines
up. Wick Thin CA into the joint between the fuselage
and
stabilizer . Make sure to glue both top and bottom. Do
not use accelerator— to allow the CA to wick in the
joint,
providing
the
best
bond
possible.
7. Follow the same procedure for hinging the ailerons
to
hinge
the
stabilizer/elevator
.
Use
six
hinges
for
this
step.
E-flite
Extra
260
480
ARF
Assembly
Manual
2