User manual EFL-EFL2475

Available from: www.modelflight.com.au
Required
Par
ts
Stabiliz
er
and
Ele
vator
2. Measure from the stab tip to the wing tip. Adjust
the
stab
until
the
measurements
are
equal.
Fuselage
w/wing
installed
Stabilizer Elevator
CA hinge (4)
Required T ools and Adhesives
Hobby knife Felt-tipped pen
Ruler T -pins
Thin CA
1. Position the stabilizer into the slot in the aft end
of the fuselage. Check that the stabilizer is
centered
in the fuselage.
A
A
A=A
3. View the air frame from the rear and make sure
the
wing and stab are parallel. If not, lightly sand the
stab
saddle
until
they
are.
E-flite
Extra
260
480
ARF
Assembly
Manual
21