User manual EFL-EFL2475

Available from: www.modelflight.com.au
3. Slide the aileron into position. Check to make sure
it can move without interference at the wing root and
wing tip. Remove the T -pins and apply Thin CA to
each
hinge. Make sure the hinge is fully saturated with CA.
Use a paper towel to clean up any excess CA from the
wing and aileron. Make sure to apply CA to both
sides
of
the
hinge.
4. Firmly grasp the wing and aileron and gently pull on
the aileron to ensure the hinges are secure and cannot
be pulled apar t. Use caution when gripping the wing
and
aileron
to
avoid
crushing
the
structure.
Note
:
Placing
a
#11
hobby
blade
between
the
aileron
leading edge and wing trailing edge to position the
aileron will result in a nice free moving hinge for 3D
throws
without
any
binding.
E-flite
Extra
260
480
ARF
Assembly
Manual
1