User Manual

Final Assembly

Required Parts

Fuselage

Wing

Canopy

Receiver

Battery

Battery hatch

4-40 x 1" socket head bolt (2)

#4 washer (2)

Hook and loop tape

Hook and loop strap

Required Tools and Adhesives

Hex wrench: 3/32"

Felt-tipped pen

Canopy glue

 1. Plug in the elevator and rudder servos and ESC

into the receiver. Mount the receiver to the inside

of the fuselage using hook and loop material.

Route the antenna wire through the bottom of the

fuselage to the rear, or as directed by your radio

instruction manual.

Note: Do not cut or change the length of the

antenna wire, as this will reduce the range of

your radio system.