User Manual

Aileron Servos and Linkages
Required Parts
Wing panel (right and left)
Micro control connector (2)
2mm x 4mm screw (2)
4" (100mm) pushrod (2)
Control horn and backplate (2)
Servos: S75 Sub-micro servo (EFLRS75) (2)
Required Tools and Adhesives
Hobby knife
6-minute epoxy
6" (150mm) servo extension (2)
String
Phillips screwdriver (small)
 1. Attach a 6" (150mm) servo extension. Use
string to secure the servo lead and extension to
prevent them from unplugging in flight.
Note: We suggest using the long 3D servo arms
for the Mini FuntanaX. Replace all existing arms
before installing the servos.
23