User Manual

Outrunner Motor Installation
Required Parts
Fuselage
Brushless motor
4-40 x 3/8" machine screw (4)
Required Tools and Adhesives
Hex wrench: 3/32"
Screwdriver (Phillips #0)
Note: This section covers the installation of the
recommended Park 480 Outrunner motor. The
holes in the firewall match the mounting pattern
of the X-mount.
 1. Attach the supplied aluminum motor X-mount
to the motor using the screws provided with the
motor. The wider section of the mount will be
positioned toward the motor wires.
15