User Manual

 1. Place the landing gear onto the bottom of
the fuselage. They will angle forward when
installed in the correct direction. Attach with
two 4-40 x 3/8" machine screws and two #4
black washers.
Landing Gear Installation
Required Parts
Fuselage
Main landing gear
Wheel pant (L&R)
1
3
/
4
" (45mm) wheel (2)
4-40 x 3/8" machine screws (2)
#4 black washers (2)
4-40 nut (2)
4-40 locknut (2)
4-40 x 1" machine screw (2)
#4 steel washers (4)
2mm x 6mm wood screws (2)
Required Tools and Adhesives
Phillips screwdriver (small)
Needle-nose pliers
Nut driver: 1/4"
Hex wrench: 3/32"
Note: You may consider using a larger diameter
wheel, such as 2
1
/
4
" (58mm) (EFLA224), if your
flying site has rough terrain. By using a larger
wheel, you will not be able to use the included
wheel pants.
13