User manual EFL-EFL2425

Available from: www.modelflight.com.au
5. W ork the aileron up and down
several
times to work in the hinges and check
for
proper
movement.
Ailer
on
Ser
v
os
and
Linka
ges
Required Par ts
Wing panel (right and left)
Micro control connector (2)
2mm x 4mm screw (2)
4" (100mm) pushrod (2)
Control hor n and backplate (2)
Ser vos: JR 241 Sub-micro ser vo (JRPS241) (2)
Large Ar m w/Screws (JRP A212) (2)
Required T ools and Adhesives
Hobby knife 6-minute epoxy
6" (150mm) ser vo extension (2) String
Phillips screwdriver (small)
6. Repeat Steps 1 through 5 for the
remaining
aileron.
14