User manual EFL-EFL2425

Available from: www.modelflight.com.au
Required
Par
ts
Ailer
on
Hinging
1.
Locate
the
positions
for
the
hinges.
Drill
a
3/32" (2.5mm) hole in the center of each slot.
This creates a tunnel for the CA, allowing the
Wing (left and right) Aileron (left and right)
CA hinges (8)
Required T ools and Adhesives
3/32" (2.5mm) drill bit Drill
T -pins Thin CA
Paper
towel
CA to penetrate into the hinge better , bonding
the
hinges
more
securely
.
11