User Manual

Model Assembly Continued

Wing Installation Continued

Top Wing Placement Continued

3. Secure the top wing asembly to the center strut bracket with the 2

included screws (B).

4. Install the left and right wing struts (C) by sliding them into position

decals facing out. Carefully lift the wing tip of the top wing and slide the

wing strut towards the fuselage. Align the 2 tabs with the 2 recesses

untill the strut rests into place.

5. Secure the left and right wing struts into place using the 4 included wing

strut pins (D). Insert a pin in the top and bottom of each wing strut. Once

the pin is slid into position, rotate the L-bend to tuck it away; a magnet

will secure it into position.

When needed, disassemble in reverse order.

15mm (2)