Beechcraft D18 1.5m Manual

Beechcraft D18 1.5m

Model Assembly

WARNING: Do not perform this or any other equipment test without turning

on throttle cut. Serious injury or property damage could result from the motor

starting inadvertently.

Wing Installation

1. Align and insert the wing into the opening in the bottom of the fuselage.

2. Secure the wing into position using the included 4 screws (M3x10mm) (A)

using a Phillips screwdriver..

3. Insert a wing tube (B) into each wing tip (C).

4. Align the wing tip with the wing and press them together until they click.

Simply pull them OFF the center wing panel to remove.

Disassemble in reverse order.

Tip: Rocking the wing tip fore and aft slightly will more easily disengage the wing

tip retainers.

M3 x 10mm

Button Head

Machine Screw