Focke-Wulf Fw 190A Manual

Fw 190A 1.5m

Wing Installation

1. Align the hands-free servo connector and press the wing into the

wing saddle.

2. Secure the wing into position using the included four screws (M3 x 32mm)

(A). Use a 2mm hex driver to tighten the screws.

3. Align the wing tip with the wing center panel and press them together until

they click. Simply pull them OFF the wing to remove.

Disassemble in reverse order.

Model Assembly Continued

Continued

M3 x 32mm

Countersunk Machine Screw