User Manual

Su-30 70mm Twin EDF

AS3X Control Direction Test

Aircraft

Movement

AS3X Reaction

ElevatorAileronRudder

This test ensures that the AS3X

control system is functioning properly. Assemble

the aircraft and bind your transmitter to the receiver before performing this test.

1. Raise the throttle to any setting above 25%, then lower the throttle to activate

AS3X technology.

CAUTION: Keep all body parts, hair and loose clothing away from the fan

intake, as these items could become entangled.

2. Move the entire aircraft as shown and ensure the control surfaces move in

the direction indicated in the graphic. If the control surfaces do not respond

as shown, do not ﬂ y the aircraft. Refer to the receiver manual for more

information.

Once the AS3X system is active, control surfaces may move rapidly. This is normal.

AS3X remains active until the battery is disconnected.

During your ﬁ rst ﬂ ight, trim the aircraft for level ﬂ ight at 3/4 throttle with the gear

up. Make small trim adjustments with your transmitter’s trim switches to straighten

the aircraft’s ﬂ ight path.

After adjusting trim do not touch the control sticks for 3 seconds. This allows the

receiver to learn the correct settings to optimize AS3X performance.

Failure to do so could affect ﬂ ight performance.

After landing, adjust the linkages mechanically to account for trim changes and

then reset the trims to neutral. Ensure the aircraft will ﬂ y straight and level with no

trim or sub-trim.

In Flight Trimming

3 Seconds