User Manual

27E-flite Diamante 25e ARF Assembly Manual
Final Assembly
Required Parts
• Fuselage assembly • Canopy
• Receiver
Required Tools and Adhesives
• Hook and loop tape • Masking tape
• Canopy Glue (PAAPT56) • Felt-tipped pen
• Sandpaper
 1. Secure the receiver inside the fuselage using hook
and loop tape. Follow the instructions provided with the
receiver when installing the antenna.
 2. Place the canopy onto the hatch. Use a felt-tipped pen
to trace the outline of the canopy onto the hatch.
Note: Use care not to change the position of the back of
the canopy hatch.
 2. Lightly sand the hatch inside the line drawn in the last
step. Also sand the inside of the canopy where it contacts
the hatch. Use rubbing alcohol and a paper towel to
wipe down the two contacting surfaces.