User Manual

10 E-flite Diamante 25e ARF Assembly Manual
  5. Apply a few drops onto each hinge. Make sure to
apply the CA on both the top and bottom of the hinge.
Important: Do not use accelerator on the hinges. The CA
must be allowed to soak in and penetrate the hinge.
  6. Gently pull the aileron from the wing once the CA has
fully cured. This is to verify the hinges are glued securely.
  7. Flex the aileron through its range of motion a few
times to break in the hinges.
 8. Repeat Steps 1 through 7 to complete the
aileron installation.