User Manual

Radio Installation

Required Parts

• Airframe • Cable crimp (8)

• Servo (3) • Long servo arm (3)

• Control cable • Hook and loop meterial

• Micro control horn w/backplate (2)

• Servo extension, 3" (76mm)

• Micro cable adjust connector (4)

• Aileron linkage,

" (146mm) (2)

• Aileron interconnect linkage,

" (235mm) (2)

• Micro control connector w/nylon backplate and

2mm x 3mm screw (8)

Required Tools and Adhesives

• Foam-safe CA • Pliers (for crimping)

• Hot glue • Low-tack tape

• Phillips screwdriver (small)

 5. Attach the propeller using the propeller adapter

included with the motor.

 6. Secure the speed control location using double-

sided tape or hook and loop. Exact speed control

location may vary, depending on the brand used

and the center of gravity.