User Manual

Stabilizer and Rudder Installation

Required Parts

• Fuselage • Stabilizer w/left elevator

• Right elevator • Carbon elevator joiner (2)

• Rudder • Control horn (2)

• Hinge tape

Required Tools and Adhesives

• Foam-safe CA • Ruler

• Paper towel/tissue • String

• T-pins • Foam-safe activator

 1. Use foam-safe CA to glue the plywood elevator

horn into position.

Note: Ensure that the holes in the control horn

are in line with the hinge line.

 2. Slide the stabilizer into position, centering it in the

slot. Sight from the rear of the fuselage and check

that the stabilizer is parallel to the wings. If not,

lightly sand the opening in the fuselage.