Manual

39E-flite AT-6 Texan ARF Assembly Manual
Wing Installation
Required Parts
Wing panel (left and right) Wing center section
Wing tube (2) 1/4-20 x 2-inch nylon bolt (2)
Y-harness (2)
3-inch (76mm) servo extension (3)
4-40 x 3/4-inch socket head screw (2)
Required Tools and Adhesives
Ball driver: 3/32-inch Threadlock
Flat blade screwdriver
 1. Secure a Y-harness to both the flap and aileron
extensions in one wing panel.
 2. Slide one of the wing tubes into the wing center
section that corresponds to the wing panel from Step 1.
 3. Tie the string from the center section to the ends of the
Y-harness that will plug into the receiver.