Manual

3E-flite Apprentice Assembly Manual
Contents of Kit/Parts Layout
EFL2726 Wing Set
EFL2727 Fuselage
EFL2728 Tail Set
EFL2729 Cowl
EFL2730 Pushrod Set
EFL2731 Nose Gear
EFL2732 Main Landing Gear
EFL2733 Spinner
EFL2734 Motor Mount
EFL2735 5mm Prop Adapter
EFLA1030 30 Amp Pro Switch-mode
BEC Brushless ESC
EFLB1040 3200mAh 3S 11.1v 15C Li-Po Battery
EFLC3010 3 Amp 12V balancing Li-Po charger
EFLM7215 BL15 outrunner, 840 kV motor
EFLP11080E 11 x 8 Electric Propeller
EFLR7130 12g sub micro servo (used on ailerons)
EFLR7140 13g sub micro servo (used on elevator)
EFLR7150 37g standard servo (used on rudder)
SPM5500 DX5e Radio system
SPMAR500 AR500 DSM2 Full-Range Receiver
Required Tools and Adhesives
Tools & Equipment
EFLA250 Parkflyer Tool Assortment, 5-piece
Or Purchase Separately
Phillips screwdriver: #1
Adjustable wrench
Ruler
Optional Accessories
EFLA110 Power Meter
EFLC3005 Celectra
™
1- to 3-Cell LiPo Charger
EFLC505 Intelligent 1- to 5-Cell Balancing Charger
EFLB32003S 3200mAh 3S 11.1V 20C LiPo Battery
EFLP11080E 11x8 Electric Prop
SPM6805 Trainer Cord
DYN4055 12-Volt, 10-Amp Power Supply
Note on Lithium Polymer Batteries
Lithium Polymer batteries are significantly more
volatile than alkaline or Ni-Cd/Ni-MH batteries used
in RC applications. All manufacturer’s instructions
and warnings must be followed closely. Mishandling
of LiPo batteries can result in fire. Always follow the
manufacturer’s instructions when disposing of Lithium
Polymer batteries.
Important Warranty Information
Please read our Warranty and Liability Limitations section
on Page – before building this product. If you as the
Purchaser or user are not prepared to accept the liability
associated with the use of this Product, you are advised to
return this Product immediately in new and unused condition
to the place of purchase.