Owner manual

7
Float Installation (J-3 Cub)
Required Parts
• Fuselage • Landing gear
• Ventral fin mount • Ventral fin
• 3mm setscrew (4) • Hex wrench: 1.5mm
• Nylon bracket (4)
• 5/32" wheel collar (4)
• 3mm x 12mm sheet metal screw (16)
• 2mm x 12mm sheet metal screw (3)
• Nylon strap (2)
Required Tools and Adhesives
• Phillips screwdriver • File or rotary tool
• Threadlock • Hobby knife
• 6-minute epoxy
 1. Remove the packing material from the landing
gear. Attach it to the fuselage using the two
nylon straps that were used to hold on the main
gear and the two nylon straps included with the
float kit. Use 2mm x 12mm screws to install the
nylon straps.