Owner manual

Replacement Parts

EFLA501 Wire Struts

EFLA502 Float A

ELFA503 Water Rudder

EFLA504 Hardware Package

EFLA505 Float B

Note: Both floats are identical in construction.

When reordering parts, Float B (EFLA505) has

the holes drilled on the stern for the rudder

assembly mount bracket. Float B (EFLA502)

does not have the holes pre-drilled.

Adhesives Required

HAN8000 6-Minute Epoxy

Threadlock

Using the Manual

This manual is divided into sections to help make

assembly easier to understand, and to provide breaks

between each major section. In addition, check boxes

have been placed next to each step to keep track of each

step completed. Steps with a single circle () are performed

once, while steps with two circles ( ) indicate that the

step will require repeating, such as for a right or left wing

panel, two servos, etc.

Remember to take your time and follow the directions.