Owner manual

 1. Locate the holes on the fuselage for the rear
landing gear. These are located behind the air
exit on the fuselage. Use a hobby knife to
remove the covering. Attach the landing gear
to the fuselage using three 4-40 x 1/2" socket
head screws.
Float Installation (Ultra Stick 25e)
Required Parts
• Fuselage • Landing gear
• 3mm setscrew (4)
• Nylon bracket (4)
• 4-40 x 1/2" socket head screw (3)
• 5/32" wheel collar (4)
• 3mm x 12mm sheet metal screw (16)
Required Tools and Adhesives
• Phillips screwdriver • File or rotary tool
• Threadlock • Hobby knife
• Hex wrench: 3/32"
Note: The Ultra Stick 25e comes with the
necessary landing gear mounts for the
installation of the floats. You will also find 4
molded 3.5mm spacer blocks in the Ultra Stick
25e kit which will be used when mounting the
float mounts onto the floats. Use these parts in
addition to the float hardware to complete the
installation.
17