User's Manual
Table Of Contents
- SAFETY TRAINING INFORMATION
- QUICK REFERENCE GUIDE
- FEATURES
- CONTROLS AND DISPLAY
- BASIC OPERATION
- GENERAL FEATURES
- STANDARD GROUP CALLS
- TELEPHONE CALLS
- LTR-NET AUXILIARY CALLS
- OPTION SWITCHES AND MENU MODE
- DIAL MODE
- SYSTEM AND GROUP SCANNING
- LTR-NET AND LTR FEATURES
- LTR-NET FEATURES
- LTR FEATURES
- CONVENTIONAL FEATURES
- MISCELLANEOUS
- INDEX
- TABLE OF CONTENTS
GENERAL FEATURES
28
Time-Out Timer
The time-out timer disables the transmitter if it is keyed continu-
ously for longer than the programmed time. It can be programmed for 0.5
- 5.0 minutes or disabled entirely. If the transmitter is keyed continuously
for longer than the programmed time, the transmitter is disabled,
“TIMEOUT” is indicated in the display and the intercept tone sounds.
The timer and tone are reset by releasing the PTT switch.
One use of the time-out timer feature is to prevent a repeater from
being kept busy for an extended period by an accidentally keyed trans-
mitter. It can also prevent possible damage to the transmitter caused by
transmitting for an excessively long period.
Tone Select
If the TONES menu parameter is selectable, the tones that sound can
be selected. Otherwise, the tones that sound are fixed by programming.
The following choices are available. Refer to page 36 for more informa-
tion on using the menu mode.
Silent - All tones are disabled.
Keys - Only the key press tones are enabled.
Alerts - All tones except the preceding key press tones are enabled.
All - Both the key press and alert tones are enabled.