User's Manual

ManualsBrandsE F Johnson ManualsElectronicsUHF FM Handheld Transceiver Held-to-face

Table Of Contents

SAFETY INFORMATION
IMPORTANT OPERATING INFORMATION
QUICK REFERENCE GUIDE
FEATURES
- General Features
- LTR-Net Features
- LTR Features
- Conventional Features
CONTROLS AND DISPLAY
- Top Panel Controls
- Side Controls
- Display
- Front Panel Keys
BASIC OPERATION
- Power-Up Sequence
- Backlight Operation
- Setting Volume Levels
- System/Group Display Mode
- System and Group Select
- Keypad Disable
- Transceiver Lock
- Low Battery Indication
- Option Switches
- LTR-Net, LTR, and Conventional Operation
GENERAL FEATURES
- Bank Select
- Call Indicator
- Emergency Switch
- Encryption
- Home System/Group Select
- Option Select
- Power Select
- Proceed (Clear-To-Talk) Tone
- Receive-Only Groups
- Stealth Mode
- Time-Out Timer
- Tone Select
STANDARD GROUP CALLS
- General
- Placing a Standard Group Call
- Receiving a Standard Group Call
TELEPHONE CALLS
- General
- Placing Telephone Calls
- Receiving a Telephone Call
- Landside-Originate Telephone Calls
LTR-NET AUXILIARY CALLS
- General
- Placing LTR-Net Auxiliary Calls
- Receiving Auxiliary Calls
OPTION SWITCHES AND MENU MODE
- Option Switches
- Menu Mode
DIAL MODE
- Introduction
- Selecting Dial Mode
- Dialing a Number
- Sending the Number
- Storing Numbers in Memory
- Recalling Numbers From Memory
- Exiting Dial Mode
- Placing Calls Without Selecting Dial Mode
SYSTEM AND GROUP SCANNING
- General
- Scan List Programming
- Scan Delay and Continue Timers
- Transmitting In The Scan Mode
LTR-NET AND LTR FEATURES
- Transmit Inhibit
- Priority Calls
LTR-NET FEATURES
- LTR-Net Standard Calls
- LTR-Net Special Calls
- Busy Queuing
- Roaming
LTR FEATURES
- Standard Group Calls
- Telephone Calls
CONVENTIONAL FEATURES
- Squelch Adjust
- Monitoring Before Transmitting
- Transmit Disable On Busy
- Talk-Around
- Call Guard Squelch
MISCELLANEOUS
- Supervisory Tones
- LTR-Net Special Call Tones
- LTR Telephone Call Tones
- Display Messages
- Menu Mode Messages
- Rechargeable Battery Pack
- Speaking Into Microphone
- Operation At Extended Range
- Licensing
- Transceiver Service
INDEX
TABLE OF CONTENTS

OPTION SWITCHES AND MENU MODE

Menu Mode

Introduction

The menu mode is selected by pressing FCN MENU. Functions

which can be controlled by the menu mode are indicated by an entry in

the “Menu Items” column of the preceding table. More information on

each function can be found on the page indicated in this

table. Parameters

are not displayed in the menu mode if they are not used, in a fixed state,

or controlled by only an option switch. Calls cannot be received or trans-

mitted while the menu mode is selected.

Using Menu Mode

A flowchart of the menu mode is shown on the next page. Proceed

as follows to select functions using the menu mode:

1. Select the menu mode by pressing FCN MENU. The first menu param-

eter is then displayed.

Menu Mode and Option Switch Functions

Function Menu Items

Option

Switch

See Descrip.

on Page

Bank select BANK SEL X 25

Emergency sys/grp select X 26

Encryption on-off ENCRYPT X 26

Option select OPTION X 27

Roaming on-off [1] ROAMING X 48

Scan type select SCN TYPE 41

Scan continue on-off SCN CONT 44

Scan list save mode SCN SAVE 43

Stealth mode select STEALTH 28

Tone type select TONES 29

NOTES: Functions left blank are not available.

[1] Available with LTR-Net operation only.