User's Manual

ManualsBrandsE F Johnson ManualsElectronicsUHF FM Handheld Transceiver Held-to-face

Table Of Contents

SAFETY INFORMATION
IMPORTANT OPERATING INFORMATION
QUICK REFERENCE GUIDE
FEATURES
- General Features
- LTR-Net Features
- LTR Features
- Conventional Features
CONTROLS AND DISPLAY
- Top Panel Controls
- Side Controls
- Display
- Front Panel Keys
BASIC OPERATION
- Power-Up Sequence
- Backlight Operation
- Setting Volume Levels
- System/Group Display Mode
- System and Group Select
- Keypad Disable
- Transceiver Lock
- Low Battery Indication
- Option Switches
- LTR-Net, LTR, and Conventional Operation
GENERAL FEATURES
- Bank Select
- Call Indicator
- Emergency Switch
- Encryption
- Home System/Group Select
- Option Select
- Power Select
- Proceed (Clear-To-Talk) Tone
- Receive-Only Groups
- Stealth Mode
- Time-Out Timer
- Tone Select
STANDARD GROUP CALLS
- General
- Placing a Standard Group Call
- Receiving a Standard Group Call
TELEPHONE CALLS
- General
- Placing Telephone Calls
- Receiving a Telephone Call
- Landside-Originate Telephone Calls
LTR-NET AUXILIARY CALLS
- General
- Placing LTR-Net Auxiliary Calls
- Receiving Auxiliary Calls
OPTION SWITCHES AND MENU MODE
- Option Switches
- Menu Mode
DIAL MODE
- Introduction
- Selecting Dial Mode
- Dialing a Number
- Sending the Number
- Storing Numbers in Memory
- Recalling Numbers From Memory
- Exiting Dial Mode
- Placing Calls Without Selecting Dial Mode
SYSTEM AND GROUP SCANNING
- General
- Scan List Programming
- Scan Delay and Continue Timers
- Transmitting In The Scan Mode
LTR-NET AND LTR FEATURES
- Transmit Inhibit
- Priority Calls
LTR-NET FEATURES
- LTR-Net Standard Calls
- LTR-Net Special Calls
- Busy Queuing
- Roaming
LTR FEATURES
- Standard Group Calls
- Telephone Calls
CONVENTIONAL FEATURES
- Squelch Adjust
- Monitoring Before Transmitting
- Transmit Disable On Busy
- Talk-Around
- Call Guard Squelch
MISCELLANEOUS
- Supervisory Tones
- LTR-Net Special Call Tones
- LTR Telephone Call Tones
- Display Messages
- Menu Mode Messages
- Rechargeable Battery Pack
- Speaking Into Microphone
- Operation At Extended Range
- Licensing
- Transceiver Service
INDEX
TABLE OF CONTENTS

CONTROLS AND DISPLAY

Front Panel Keys

Most front panel keys have two or more functions. The function on

the key is usually selected by simply pressing the key, and the function

under the key is usually selected by first pressing another key such as the

FCN key. In addition, some key functions may be available in the stan-

dard mode and others in the dial mode (see page 38). Holding the key

down causes repeating when applicable. The front panel keys operate as

follows:

FCN (SCAN)

Standard Mode

FCN - Enables the alternate function of the next key that is pressed.

This alternate function is active for 2 seconds or until another key

is pressed.

FCN SCAN - Turns scanning on and off.

Dial Mode

FCN - Selects the alternate function of various keys as described in

the following information.