User Manual
Table Of Contents
- TABLE OF CONTENTS
- SAFETY TRAINING INFORMATION
- QUICK REFERENCE GUIDE
- FEATURES
- CONTROLS AND DISPLAY
- BASIC OPERATION
- GENERAL FEATURES
- STANDARD GROUP CALLS
- TELEPHONE CALLS
- LTR-NET AUXILIARY CALLS
- OPTION SWITCHES AND MENU MODE
- DIAL MODE
- SYSTEM AND GROUP SCANNING
- LTR-NET AND LTR FEATURES
- LTR-NET FEATURES
- LTR FEATURES
- CONVENTIONAL FEATURES
- MISCELLANEOUS
- INDEX
CONTROLS AND DISPLAY
14
- Indicates that an optional accessory is enabled (see page 27).
C - Indicates that a call has been received on a group programmed for a
call indicator (see page 25). Press any key to turn this indication off.
- Indicates that the conventional monitor mode has been enabled by
the Monitor option switch (see page 50).
- “
P” indicates that the displayed group is an LTR-Net/LTR priority
1 group, and “
P2” indicates that it is a priority 2 group (see page 46).
- Indicates that the displayed group is in the scan list and scanned
normally (see page 43).
BUSY - Indicates that the selected conventional channel is currently busy
with voice or other traffic.
- Indicates a low battery condition. The battery should be
recharged or replaced as soon as practical (see page 23).
UID - Indicates that the displayed group is programmed for an LTR-Net
Unique ID or Directed Group call (see page 47).
- Indicates that the keypad has been disabled by pressing FCN
(page 22).
Tx - Indicates that the transmitter is keyed (push-to-talk switch pressed).
P
2
G