User's Manual

Viking™ VP600 Portable Radio Operating Manual 7-3
Messages
Invalid - This error indicates that the received input from the user does not fit the
criteria necessary for the feature.
Invalid Chan - This error indicates that the channel entered by the user in keypad
programming is not valid.
Invalid ID - This error indicates that the ID entered by the user (e.g. for a Unit Call) is
not valid.
Invalid Key - This error occurs when the user attempts to select an invalid key or
transmit is aborted due to an invalid key.
Invalid TG - This error indicates that the talkgroup entered into the radio during
Talkgroup Select or Keypad Programming is invalid.
Invalid User - This error indicates that the user’s radio ID was rejected by the system.
This message is primarily related to data registrations.
Key Fail - This error indicates that the encryption key required by the current selected
group / channel is not valid or does not exist.
Kypd Lockd - This error indicates that the keypad lock function is active and key
presses are not accepted in this mode.
Kset Fail - This error indicates that the radio was not able to activate the encryption
keyset chosen by the user.
Locked - This error indicates that the dynamic regrouping selector lock command has
been received and zone and channel changes are not accepted.
List Full - This error occurs during Scan Edit when a user attempts to add too many
channels to the scan list.
List Only - This error occurs when the user attempts to do direct entry of a unit ID/
phone number for Call Alert/Units Calls/ or Interconnect but the call setting is set for
list only.
Lost Signal - This error indicates that signal from the infrastructure has been lost
during an interconnect call or a P25 Trunking unit call.
Msg Failed - This error indicates that the message the user was trying to send failed.
This applies to conventional messaging.
No Ack - This error indicates that the radio did not receive an ACK for the current
signaling attempt, such as trunking units calls.
No Answer - This error occurs when the user initiates a trunking unit/interconnect call
but the call was not answered before being canceled by the system.
No Data - This error occurs when the user attempts to use the gps feature but the radio
is not receiving gps data.
No Edit - This error indicates that the current list is not able to be edited. Applies to
conventional and radio wide scan edit.