User's Manual
Table Of Contents
- Features
- Controls and Display
- General Operation
- Radio-wide Features
- 4.1 Viewing Radio Information
- 4.2 Option Keys / Buttons
- 4.3 Feature Enable / Disable
- 4.4 Menu Mode
- 4.5 Function Recall
- 4.6 Time-Out Timer
- 4.7 Home Channel Select
- 4.8 Power Output Select
- 4.9 Alert Tone Select
- 4.10 Surveillance Mode
- 4.11 Scanning
- 4.12 Global Positioning System (GPS)
- 4.13 Radio Service
- 4.14 Fire Ground Mode
- Conventional Mode Features
- 5.1 Monitoring Before Transmitting
- 5.2 Monitor Mode
- 5.3 Busy Channel Lockout
- 5.4 Call Guard Squelch
- 5.5 Penalty Timer
- 5.6 Conversation Timer
- 5.7 Repeater Talkaround
- 5.8 Displaying Transmit / Receive Frequency
- 5.9 Emergency Alarm and Call
- 5.10 Conventional Mode Scanning
- 5.11 Standard Conventional Calls
- 5.12 ANI Signaling Options
- 5.13 Project 25 Mode Features
- 5.13.1 Digital Unit ID
- 5.13.2 Talkgroup ID
- 5.13.3 Network Access Code
- 5.13.4 Out of Range (EFJohnson Conventional) Indication
- 5.13.5 Automatic (EFJohnson Conventional) Registration
- 5.13.6 P25 Group Calls
- 5.13.7 Talkgroup Scan
- 5.13.8 P25 Unit Calls
- 5.13.9 P25 Conventional Telephone Calls
- 5.13.10 Call Alert
- 5.13.11 Call History
- 5.13.12 Messaging
- 5.13.13 Status Messaging
- 5.13.14 P25 Packet Data
- 5.14 Keypad Programming
- 5.15 Text Messaging
- 5.16 Fire Ground Mode
- SmartNet / SmartZone / P25 Trunked Features
- 6.1 Analog and Digital Operation
- 6.2 Standard Group Calls
- 6.3 Private (Unit-To-Unit) Calls
- 6.4 Telephone Calls
- 6.5 Call Alert
- 6.6 Messaging
- 6.7 Sending Status Conditions
- 6.8 Emergency Alarm and Call
- 6.9 Failsoft Operation
- 6.10 SmartNet / SmartZone / P25 Trunked Scanning Features
- 6.11 Dynamic Regrouping
- 6.12 SmartZone and P25 Trunking Unique Features
- 6.13 Zone Password
- Messages
- Secure Communication (Encryption)
- Data Features
- Service Information
7-4 Viking Portable 600 Radio Operating Manual
Messages
No Encrypt - This error occurs when attempting to use or load keys but the radio is not
optioned for encryption.
Menu Empty - The menu the user tried to access does not have any items.
No Keys - This error indicates that no keys are available for the key select function.
No List - This error indicates that no list is available for the selected feature.
No Message - This error occurs when attempting to activate the Message feature but no
messages are programmed.
No Priority - This error occurs when attempting to use the conventional Priority feature
on a non-priority scan list.
No Service - This error indicates that OTAR service is not available.
No Site - This error indicates that no site with a verified ID is yet on the dynamic site
list.
No UKEK - This error occurs when attempting to rekey with no UKEK.
Out of Rng - This error indicates no control channel has been found for trunking
operation.
Parms Fail - There is no parameter file in the radio. This error will also be indicated
with 3 orange blinks of the LED.
Rx Only - This error indicates that the selected channel is Rx only. This can occur if
transmit disabled is selected or a conventional channel is configured with talkgroup 0.
Reg Deny - This error indicates that a unit registration attempt has received a DENY
response from the system. The precise reason for a DENY response is manufacturer
dependent. One common cause is that the unit ID is disallowed on the site/RFSS that
the radio is attempting to register on.
Reg Failed - This error indicates that a unit registration attempt has received a FAILED
response from the system. The precise reason for a FAILED response is manufacturer
dependent.
Reg Refusd - This error indicates that a unit registration attempt has received a
REFUSED response from the system. The precise reason for a REFUSED response is
manufacturer dependent.
Rekey Fail - This error indicates a failure in a rekeying process.
Rspns Only - This error indicates that the Unit Call/Call Alert setting to set to
Response Only.
Secure Only - The user is attempting to transmit Clear on a Strapped Secure channel.
Sts Failed - This error indicates that no acknowledgement was received while sending a
status report.
Too Hot - This error indicates that the mobile has passed the TOO HOT temperature
threshold. Under these conditions the radio will not allow Tx.
Preliminary Draft 3/9/12