Product Info

Draft 2/8/12
Viking Portable Radio Service Manual 2-9
Battery, Accessory and Disassembly Information
7 Pull the rubber knobs and plastic channel number ring off the shafts.
8 To remove the position indicator ring under the channel knob, turn the channel switch
so that the flat part of the shaft is toward one of the tangs (see below). Then insert
tweezers or similar tool under both tangs and push it inward to release the tangs from
the groove in the shaft.
9 Remove the spanner nut on each shaft and slide the switch assembly out of the cover.
NEEDS TO BE REPLACED