User's Manual

Draft
-2 5300 ES Series Mobile Radio Operating Manual December 2006
The six option switches on the front panel (one is located to the left of the display) can be
programmed by the PC Configure programmer to control a different set of functions for
each of the three operating modes. Therefore, up to 18 different functions can be
controlled by these switches (six each for conventional, SMARTNET/SmartZone, and P25
Trunking). The available functions in each mode and the section in which each is
described are shown in Table 4.1.
Table 4.1 Programmable Option Switch Functions
Suggested
Key Label
Function
Available in Mode: See
Descript.
in Section:
Conv. Proj 25 Trk SMARTNET SmartZone
TONES Alert tones On-Off X X X X 4.5
BKLHT Backlight On-Off X X X X 3.3
ALERT Call Alert Select X X X X 6.6
RESP Call Response Select X X X 6.4.3
Cancel Dynamic Regroup X X X 6.12
KY CHG Change Keyset X X X X 11.6.3
CH SEL Channel Select (w/HHC only) X X X X 3.4.3
C/S Clear/Secure Select X X X X 11.3
Display GPS (future feature) X
TG SEL Digital Talk Group Select X 5.15.4
DISP Display Information Select X 5.8
EMER Emergency Select X X X X 5.9, 6.9
KY CLR Erase Keys X X X X 11.2.5
PUB AD External Public Address X X X X 4.10
TX PWR High/Low Tx Power Select X X X X 4.4
HOME Home Zone Select X X X X 4.3
HORN Horn Honk Select X X X X 4.7
KY SEL Key Select X 11.2.4
PROG Keypad Programming Select X 5.16
MSG Messaging X X X 6.7
MON Monitor Mode Select X 5.2
SEL SQ Normal/Selective Select X 5.4
OTAR OTAR Rekey Request X 11.6.3
DATA P25 Packet Data Mode X 5.15.10
PHONE Phone Call Select X X X X 5.15.6, 6.5
PRI ED Priority Channel Select X 5.10.3
CALL Private Call Select X X 6.4
RWS Radio Wide Scan Select X X X X 4.11.2
Remote Access (Pyramid Reptr) -
RTA Repeater Talk-Around Select X 5.7
RWS ED RWS List Select X X X X 4.12.2
SCAN Scan Select X X X X 4.11.1