User's Manual

5-22 5300 ES Series Mobile Radio Operating Manual March 2008
Conventional Features
5.14.1 Menu Structure
A menu system is used to select parameters in the keypad programming mode. To enter
the Menu Mode, press and hold the Select button until it beeps and enters the Menu Mode.
Rotate and press the Select switch to scroll through and select the available parameters.
The available parameters and the section in which each is described are as follows:
• CHNG ZONE (5.14.3)
• CHNG CHAN (5.14.4)
• SYS PARMS (5.14.5)
• CHAN PARMS (5.14.6)
Press the Select switch to select the displayed parameter. Press the PROG option switch
from one of the main menus to exit keypad programming or from other menus to exit back
one level. A flowchart showing the keypad programming mode menu structure is located
Figure 5.1. Refer to the descriptions which follow for more information.
Figure 5.1 5300 ES Keypad Programming Menu Flowchart
5.14.2 Zone Password
Each zone can be programmed with a password to prevent unauthorized reprogramming of
zone by keypad programming. When this password is programmed, it must be entered
before system or channel parameters in that zone can be changed by keypad programming.
A different password can be programmed for each zone.
Note Make sure that the zone passwords are not lost because they cannot be overridden in the
field. PC Configure must be used to add a new password.
Change
Change
Channel
Zone
System
Parameters
Channel
Parameters
Select
Zone
Select
Channel
Scan Hold Timer
Tx (Time-Out) Timer
Penalty Timer
Conver. Timer
Rx Freq
Tx Freq
Rx Code/NAC
Tx Code/NAC
Tx Power
Tx Timer On-Off
Sq Adjust*
Chan Space*
Tlk Grp ID Sel**
* Analog only ** Digital only
Tx Type Sel***
*** Mixed Mode Ch Only
Chan Alias
Strapping
Key Select