User's Manual

MISCELLANEOUS

Determining Current Site and Searching For a New Site

To determine the current radio site and the signal level of that site,

press the

SEARCH option switch. The display then alternately indicates

the current site number as “SITE xx” and the signal level as “RSSI xx”.

To exit, press the

SEARCH option switch again.

To scroll through the other programmed sites, rotate the Select

switch while “Site xx” or “RSSI xx” is displayed. To select the displayed

site and exit this mode, press the

SEARCH option switch again. If site

lock is on when site search is entered (see following), the radio will be

locked on the new site when this function is exited.

Locking/Unlocking a Site

It is sometimes desirable to stay on a site. To prevent the transceiver

from searching for a new site, it can be locked on the current site. To lock

on the current site, press the

LOCK option switch. The display momen-

tarily indicates “LOCK x” to indicate that the current site is locked (“x” is

the current site number). To unlock the site, press the

LOCK option

switch again and “UNLOCK” is momentarily displayed.

MISCELLANEOUS

Supervisory Tones

Single Beep (Alert Tone)

• Power was turned on and a successful power-up sequence occurred (see

“Turning Power On” on page 17).

• The time-out timer is about to expire or the penalty timer has expired

(page 19).

• The conversation timer is about to expire (page 32).

• The system received your page but the paged mobile is not on the air

(page 50).

• Telephone interconnect is not operational (page 48).