User's Manual

SMARTNET/SMARTZONE FEATURES

Answering a Telephone Call

1. When a telephone call is received, “ringing” similar to a standard tele-

phone is heard and “PHONE” is displayed.

2. To answer the call, press the

PHONE option switch and press the PTT

switch to talk and release it to listen (since the transceiver operates half

duplex, it is not possible to talk and listen at the same time).

3. When the call is finished, end it by pressing the

PHONE option switch

and placing the microphone back on-hook.

Call Alert

The Call Alert™ feature allows pages to be sent and received. Either

the Enhanced Private Conversation™ or Private Conversation II™ mode

may be programmed depending on the capabilities of the radio system.

The operation differences are noted in the procedure which follows.

Answering a Page

1. When a page is received, four beeps sound and “PAGE” is displayed.

The ID of the mobile paging you is stored as the last ID received.

2. To clear or ignore the page, press any option switch. If the PTT switch

is pressed, a group call is placed on the selected channel.

3. To answer the page as a private call (see page 45), press the

CALL

(Private Call) option switch and the tag (alias) of the mobile paging you

is displayed. Press the PTT switch and respond. One of the conditions

that follow may also occur:

Enhanced Private Conversation™ Mode

• If the mobile being called is on the air, ringing is heard until the called

party answers or for 20 seconds, whichever occurs first. If no answer

occurs within 20 seconds, “NO ANS” is displayed.