User's Manual

SMARTNET/SMARTZONE FEATURES

Receiving a Private Call (All Types)

1. When a private call is received, “CALL” is displayed and a recurring

call tone sounds.

2. To answer the call, press the

CALL (Private Call) option switch and

then the PTT switch and begin speaking. The unit ID of the calling

mobile is displayed. More information follows:

• If the PTT switch is pressed before the CALL switch, the call is

transmitted as a group call.

• If private calls are not permitted (CALL switch not programmed)

press the

RESP (Call Response) option switch to respond.

• The call must be answered within 20 seconds or it is automatically

terminated.

• If the system is busy when a response is made, “BUSY” is displayed

and the busy tone sounds.

Telephone Calls

Telephone calls allow you to place and receive calls over the public

telephone system using your transceiver. The type of call (secure/clear) is

determined by the mode selected by the

C/S (Clear/Secure) option

switch. Telephone calling is programmed to operate in one of the

following modes:

• Disabled (telephone calls not available)

• Answer-only capability

• Telephone numbers can be recalled from memory only

Placing a Telephone Call by Recalling a Number From Memory

1. With a SMARTNET/SmartZone channel selected, momentarily press

the

PHONE option switch. The tag (alias) of the last called telephone

number is displayed.