User's Manual

SMARTNET/SMARTZONE FEATURES

(selected by pressing the C/S (Clear/Secure) option switch if enabled

on the channel).

4. When the call is finished or is not answered, end it by pressing the

Private Call option switch and placing the microphone back on-hook.

Placing a Private Conversation II Call

1. Momentarily press the CALL (Private Call) option switch. The tag

(alias) of the last called mobile is displayed.

2. To select another mobile, rotate the Select switch until the tag for the

desired mobile is displayed.

3. Press the PTT switch and one of the following events then occurs:

• The called party answers the call.

• The called party does not answer. Press the CALL option switch to

end the call.

• If the selected mobile ID is not valid, “INVALID” is displayed and an

alert tone sounds.

• If the radio system is busy, four low tones sound and “BUSY” is

displayed. When the system is no longer busy, the call back tone (four

beeps) is heard and the channel is automatically acquired. Press the

PTT switch to continue the call.

• If the call is in the secure mode and your transceiver does not have the

proper encryption key, “KEYFAIL” is displayed and the call must be

made in the clear mode (selected by pressing the

C/S (Clear/Secure)

option switch if enabled on the channel).

4. When the call is finished or if it is not answered, end it by pressing the

CALL option switch and placing the microphone on-hook.