User's Manual

CONVENTIONAL FEATURES
40
Figure 4 Keypad Programming Menu Flowchart
Zone Change Parameter
The “ZONE CHG” menu parameter selects the zone containing the
conventional channel to be reprogrammed. It does not change the zone
selected for normal operation. Press the Select switch to select the
“ZONE CHG” parameter and then scroll through the programmed zones
by rotating that switch. When the desired zone is displayed, select it by
pressing the Select switch.
Channel Change Parameter
The “CHAN CHG” menu parameter selects the conventional
channel to be reprogrammed. Unavailable or SMARTNET/SmartZone
channels cannot be selected. This does not change the channel selected
for normal operation. Press the Select switch to display “CHAN CHG”
Zone
Channel
Change
Change
System
Parameters
Channel
Parameters
Select
Zone
Select
Channel
Scan Hold Timer
Transmit Timer
Penalty Timer
Conver. Timer
Rx Freq
Tx Freq
Rx Code/NAC
Tx Code/NAC
Tx Power
Tx Timer
Chan Spacing
Squelch