User's Manual

CONVENTIONAL FEATURES

press the PTT switch and begin talking before a call timer expires.

Proceed as follows to place this call:

1. Press the

CALL option switch and the identification of the last indi-

vidual call placed is displayed.

2. If required, rotate the Select switch to display the identification of the

mobile you are calling.

3. Press the PTT switch and begin talking.

When individual calls are received, the transceiver may be

programmed to display the selected talk group, the talk group of the call,

or the ID of the calling radio.

Keypad Programming

Introduction

Keypad programming is available if the PROG option switch is

programmed. It is then selected by simply pressing that switch. The

keypad programming mode is indicated by “ZONE CHG” and blanked

Zone and Channel displays as follows:

Keypad programming allows conventional channel parameters such

as the transmit and receive frequency and Call Guard squelch code to be

changed. In addition, several conventional mode timers can be changed.

It cannot be used to reprogram unavailable channels or any SMARTNET/

SmartZone information.