User's Manual

CONVENTIONAL FEATURES

Changing The Priority Channel

If a specific priority channel is associated with the current scan list,

it can be changed if the

PRI SEL option switch is programmed. Proceed

as follows:

1. Make sure that both standard and radio wide scanning are off (the

rotating icon is not indicated in the right status display).

2. Select the channel that you want to be the priority channel using the

Select switch in the normal manner. If the channel is in a different zone,

also select the appropriate zone.

3. Press the

PRI SEL option switch and “P” is indicated in the left status

display as just described to indicate that the selected channel is now the

priority channel.

Standard Conventional Calls

Standard conventional calls can be placed to other mobile units

monitoring the selected channel. The proper coded Call Guard squelch

tone or code may need to be transmitted by your transceiver for them to

receive your call (see page 30).

Placing a Standard Conventional Call

1. Turn power on and set the volume as described on page 17. Select the

channel programmed for the mobile you want to call (see “Zone/

Channel Select” on page 18).

Priority Indicator