User's Manual

GENERAL OPERATION

Nuisance Channel Delete

With standard scanning, channels can be temporarily deleted from

the scan list, for example, if messages on a channel become annoying.

This feature is not available with radio wide scanning. Proceed as

follows:

NOTE: The selected channel and also conventional priority channels

cannot be deleted from the scan list.

1. While receiving a message on the channel to be deleted, press and hold

the

SCAN option switch until a tone sounds (approximately 2 seconds).

2. The channel is then deleted and scanning of the remaining channels in

the scan list resumes.

3. Deleted channels are added back into the scan list if any of the

following events occur:

• Scanning is turned off and then on again using the SCAN switch.

• Transceiver power is turned off and then on again.

• The scan list is reselected by changing channels (SMARTNET/

SmartZone) or using the

SCAN option switch (conventional).

Scan List Indicator

Chnl

No.